Profile avatar
jagdtiger.bsky.social
🇸🇬 21. FopBot. Will figure out what to put here later.
76 posts 42 followers 106 following
Regular Contributor
Active Commenter
Posts 19 Comments 30

Took a bit to figure out but i reckon this is a goodish way to gauge speed.

submitted 7 days ago • 0 comments

Oh yeah. Much faster. Reckon itd be even faster if using PIO to stream commands and data in.

submitted 10 days ago • 0 comments

Thinking on the next revision of my conbadge atm... Wonder if i should add the df player mini to it to add music capabilities. There are spare pins on the pico for uart.

submitted 10 days ago • 0 comments

Mistakes in code here and there, fixed =~=

submitted 12 days ago • 0 comments

Lcd arrived. Porfed testcode for it into fhe arduino ide. Works! Though i needed to bodge the backlight control. The distance between it and the board concern me a lil. Need to look into it to design a sort of spacer.

submitted 12 days ago • 0 comments

MS Flip Flop using the CMOS logic gates I made a while ago. Since it works, time to make a PCB with it all in one :p

submitted 34 days ago • 0 comments

So close to getting my Otter x16 somewhat luggable...

submitted 66 days ago • 0 comments

Is there some sort of list of popular and cheap components that hobbyists tend to use? I need to find power mosfets, both p and n channel, that can do 1a at least, whilst in preferable sot-23 or to-92 packaging. And probably able to be bought in bulk on aliexpress.

submitted 73 days ago • 0 comments

Ok so, I hooked up my inverter board to the wave generator on my scope. It's alot faster than I thought. Adding a capacitor across the power rails made it significantly less noisy too.

submitted 76 days ago • 0 comments

Seems like the rise/fall times of my CMOS inverter is slow at about 800us. Should mean I could only run them just above 1khz. Ah well.

submitted 84 days ago • 1 comment

YESSSSS

submitted 85 days ago • 0 comments

submitted 98 days ago • 1 comment

Agnus. Transforming Protogen design. Will have to polish her up soon.

submitted 106 days ago • 0 comments

Nand gate soldered and tested. Works!

submitted 106 days ago • 1 comment

Proved to work with the inverter.

submitted 109 days ago • 0 comments

Status LED works.

submitted 109 days ago • 0 comments

More of the boards arrived NAND and revised NOT gate are good, though I just realized the footprint I used for the led module is... Not the handsolder one. Balls.

submitted 110 days ago • 0 comments

I wonder if its possible to build a 65c816 computer on par with the C128, but with 74xx/4xxx logic... already trying to make a VGA card, once that's done its just the Sound, Peripherals and the chipset itself...

submitted 111 days ago • 0 comments

@popeyeotaku.bsky.social Yessss

submitted 115 days ago • 0 comments